SIZES: 

Required Value

Length and width ± 0,6% max Thickness ± 5% max Edge Straightness ± 0,5% max Rectangularity ± 0,6% max Planarity ± 0,5% max

Titanium Value 

± 0,25% max ± 0,5% max ± 0,25% max ± 0,25% max ± 0,1% max

Standard of Test 

UNI EN ISO 105445-2

WATER ABSORPTION:

Required Value

± 0,5% max

Titanium Value 

± 0,5% max

Standard of Test 

UNI EN ISO 105445-3

BENDING STRENGTH:

Required Value

Breaking modulus ? 35 N/mn

Titanium Value 

? 35 N/mn

Standard of Test 

UNI EN ISO 105445-4

RESISTANCE TO THERMAL SHOCK:

Required Value

Resistant

Titanium Value 

Resistant

Standard of Test 

UNI EN ISO 105445-9

FRICTION COEFFICIENT (SLIPPERNESS)

Required Value

From R9 to R13

Titanium Value 

R9 Min

Standard of Test 

DIN 51130

ABRASIVE RESISTANCE

Required Value

Report Abrasion class and cycles passed

Titanium Value 

PEI III Min

Standard of Test 

UNI EN ISO 105445-7

CHEMICAL RESISTANCE

Required Value

Must not produce noticeable signs of chemical attack

Titanium Value 

No visible effect

Standard of Test 

UNI EN ISO 105445-13

STAIN RESISTANCE

Required Value

Class 3 minimum

Titanium Value 

Class 3 minimum

Standard of Test 

UNI EN ISO 105445-14